Samsung SGH-I527ZKBATT - Manual (Page 104)

Adding a Basic VPN
Before you add a VPN you must determine which VPN
protocol to use: PPTP (Point-to-Point Tunneling Protocol),
L2TP(Layer 2 Tunneling Protocol)/IPSec PSK (Pre-shared key
based L2TP/IPSec), L2TP/IPSec RSA (Public key based L2TP/
IPSec), IPSec Xauth (Cross authentication) PSK, IPSec Xauth
RSA, or IPSec Hybrid (authentication) RSA.
1. Before using VPN, you must first set up a screen unlock
PIN or password. For more information, refer to “Lock
Screen Settings” on page 100.
2. From the Home screen, tap ➔ Settings ➔
Connections ➔ More networks ➔ VPN.
3. Tap Basic VPN.
4. Tap Add.
5. Enter a name for the VPN network in the Name field.
6. Select a VPN type from the Type drop-down menu. The
options are:
• PPTP (Point-to-Point Tunneling Protocol)
• L2TP/IPSec PSK (Layer 2 Tunneling Protocol / Internet Protocol
Security Pre-Shared Key)
• L2TP/IPSec RSA
• IPSec Xauth PSK
• IPSec Xauth RSA
• IPSec Hybrid RSA
7. Enter the Server address and any other required fields
that are dependent upon the Type you entered
previously.
8. Tap the Show advanced options check box to display
additional VPN options.
9. Tap Save to save your VPN settings.
Adding an IPsec VPN
1. Before using VPN, you must first set up a screen unlock
PIN or password. For more information, refer to “Lock
Screen Settings” on page 100.
2. From the Home screen, tap ➔ Settings ➔
Connections ➔ More networks ➔ VPN.
3. Tap Advanced IPsec VPN.
4. Tap Add VPN Connection.
5. Enter a password, confirm the password, and tap OK.
6. Enter a name for the VPN connection in the VPN
connection name field.
97