Samsung SGH-I527ZKBATT - Manual (Page 188)

Note: The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
11. If the TV turned on, tap Yes.
– or –
If the TV did not turn on after tapping
(Power) and
waiting 10 seconds, tap No or Retry.
12. From the Select your channel source screen, select the
entry that corresponds to your current channel control
method:
• Set-top Box: selected when changing channels is done via a
receiver box. Channels are not changed via the TV remote but
rather through the receiver/box.
• My xxx TV: selected when a signal is fed directly into the TV
and no box is used. Channels are changed directly on the TV by
using the TV remote and not a box’s remote.
Note: Try matching your current channel selection method.
13. Select the Satellite Box Brand from the available list.
• If your brand does not appear in the list, tap Other Satellite
Box Brands and follow the on-screen instructions.
Important! You must configure your set top box for IR
communication with your device. If you do not
select More Info below and follow the on-screen
instructions you may not be able to properly use
the application.
14. When prompted to Enable IR, tap More Info to learn
how to configure your set top box to receive and
respond to IR controls.
15. Once configured, tap the on-screen Channel button to
confirm functionality. Tap an on-screen confirmation
option.
16. Only after completing the IR setup process and
programming your box, press .
Note: This IR programming of your set top box is a one-time
process and once successful should not need to be
repeated.
181