Samsung SGH-I527ZKBATT - Manual (Page 187)

WatchON
With the WatchON application, you can use your phone as a
remote control for your TV.
Important! Before initiating use, verify you have an active
Internet connection available (either mobile
network or Wi-Fi connection).
Note: Before beginning your initial WatchON application setup,
confirm your TV is turned off.
Initial Configuration
1. Sign into your Samsung account.
➔ WatchON . 2. From the Home screen, tap
Note: If you are not connected to an active Wi-Fi, you may be
prompted to continue the set up process via a mobile
network. Click Connect to proceed.
3. Select your desired country for your TV Guide’s source
listing and tap Next.
4. Enter your current zip code and tap Done. This zip code
must correspond to the location of your desired TV and
set top box.
5. From the Find your TV service screen, select a service
provider from the available channel listing.
6. From the Personalize screen, you can either follow the
on-screen prompts to personalize your desired content
or tap Skip to continue without customizing your
content.
7. Read the on-screen Peel agreement and tap Agree to
complete the set up process.
8. From the top of the main screen, tap (Remote
Control) ➔ Set up now.
9. From the Select your TV Brand screen, tap your TV’s
manufacturer name.
• If you have a brand of TV not listed or you are using a projector,
select from one of the following two options. Choose from
either Show other brands or I have a home projector.
10. Aim your device at the TV and tap (Power) to
confirm the set up process completed successfully and
the correct TV IR codes were selected.
Applications 180