Samsung SPL4225DX-XAA - Manual (Page 12)

23
Connecting Speakers
22
Speaker Audio Cable Speaker Audio Cable
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP,
matching the “+” and “-” ends of the cable with the diagram on the PDP.
How to Connect
Fix the bracket onto the guide pole located on the rear
of speaker and fasten the screws.
After removing the three screws on the PDP, clamp
thespeaker and the PDP together and fasten the screws.
Connecting PDP and Speakers / Stand and Speakers
Connecting a VCR/Cable Box
S-Video Cable
Audio Cable
Video Cable
Connect Video/S-Video cable between the Video/S-Video Output jack on the VCR/Cable
box and the Video Input jack on the PDP.
• For better video, use an S-Video cable.
Connect an Audio cable between the Audio Output jacks on the VCR/Cable box and the
Audio Input jacks (Video) on the PDP.
Videotape Playback:
1. Turn on PDP and press the Video or S-Video(if S-Video jack is connected.) button on your
remote control.
2. Turn on your VCR, insert a videotape and press the Play button.
How to Connect
Power Plug
1
2
1
2 • Connecting Speakers to Stands.
Guide
pole
Guide
pole
Guide
pole
✱ External speakers MUST have a power handling capability of 7 watts minimum(impedance 8ohm).