Samsung SPL4225DX-XAA - Manual (Page 29)

57
Fine Tuning (Phase)
Preset:
• Press the RGB button to select the PC mode.
1 Press the Menu button. Move the joystick up or
down to select “SETUP”, then press the joystick to
enter.
2 Move the joystick up or down to select “Image
Lock”, then move the joystick left or right to enter.
3 Move the joystick up or down to select “Phase”.
Remove picture noise (vertical stripes) on the screen
by moving the joystick left or right.
(If phase is not set properly, the picture may be
blurry.)
4 Press the Menu button to exit.
Position
Language English
Scaling Wide
Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Position
Language English
Scaling Wide
Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Auto Adjustment
Frequency 0
Phase 0
Move Adjust Exit
Phase 50
56
Frequency Adjustment
Preset:
• Press the RGB button to select the PC mode.
1 Press the Menu button. Move the joystick up or
down to select “SETUP”, then press the joystick to
enter.
2 Move the joystick up or down to select “Image
Lock”, then move the joystick left or right to enter.
3 Remove picture noise (vertical stripes) on the screen
by moving the joystick left or right.
(If frequency is not set properly, vertical stripes
will appear on the screen.)
4 Press the Menu button to exit.
Position
Language English
Scaling Wide
Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Position
Language English
Scaling Wide
Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Auto Adjustment
Frequency 0
Phase 0
Move Adjust Exit
Frequency 50