Samsung SPL4225DX-XAA - Manual (Page 7)

ı VCR control buttons
Controls VCR tape functions: Stop, Rewind,
Play/Pause, Fast Forward.
˜ SET button
Used during setup of this remote control, so that it will
work compatibly with other devices (VCR, cable box,
DVD, etc.)
¯ Clock set button
Press to set clock.
˘ PIP control buttons
Source : Press to select one of the available signal
sources for the PIP window.
S.Sel : Press to select the Audio (PIP or Main).
Locate : Press to move the PIP window on the screen.
¿ PC control buttons
Auto Adjust
Scaling
Zoom/Pan
¸ S.Mode button
Adjust the PDP sound by selecting one of the preset
factory settings (or select your personal, customized
sound settings.)
˛ Sleep button
Press to select a preset time interval for automatic
shutoff.
S.Sel
13
Remote Control Buttons
ΠPower button
Turns the PDP on and off.
´ Number buttons
ˇ Display button
Press to display information on the PDP screen.
¨ Menu button
Displays the main on-screen menu.
ˆ CH (Channel) and VOL (Volume) buttons
Channel and Volume buttons are used for selecting
menu items in the menu mode.
Ø Mute button
Press to mute the PDP sound.
∏ P.Mode button
Adjust the PDP picture by selecting one of the preset
factory settings (or select your personal, customized
picture settings.)
” Aspect button
Press to change the screen size.
’ Mode button
Selects a target device to be controlled by the Sam-
sung remote control (ie., VCR, Cable, or DVD players).
˝ Clock Display button
Press to display clock on the PDP screen.
Ô Source button
Press to display all of the available video sources
(ie., Video, S-Video, Component1, Component2,
PC(RGB)).
 Joystick button
Use to highlight on-screen menu items and change
menu values.
Ò Still button
Press to pause the current screen.
Ú PIP button
Activates picture in picture.
Æ Source selection buttons
Press to directly select Video, S-Video, Component1,
Component2 or PC(RGB).
12
Remote Control Flip the cover open
in the arrow direction.
Installing the Batteries in Your Remote Control
1 Slide the back cover
to open the battery
compartment of the
remote control
3 Slide the cover back into
place.
2 Install two AAA size batter-
ies. Make sure to match the
“+” and “-” ends of the bat-
teries with the diagram
inside the compartment.
Remote Control Operation Range.
You can use your remote control within a distance of 23 feet and an angle of 30 degrees
from the left and right sides of the remote control receiver of the monitor.