Samsung YP-G1CW-XAA - Manual (Page 76)

Connectivity 75
›
Activate the WLAN feature
In Idle mode, open the application list and select Settings
→ Wireless and network → Wi-Fi settings → Wi-Fi.
An active WLAN running in the background will
consume battery power. To preserve battery power,
activate the WLAN only when needed.
Find and connect to a WLAN
›
In Idle mode, open the application list and select
1
Settings → Wireless and network → Wi-Fi settings.
The device will automatically search for available
WLANs.
Select a network under
2
Wi-Fi networks.
Enter a password for the network (if necessary).
3
Select
4
Connect.
When prompted, enter the PIN for the Bluetooth
2
wireless feature and select OK (if necessary).
Select
3
Accept to confirm that you are willing to receive
data from the device (if necessary).
Received data is saved to the bluetooth folder.
Wi-Fi
Learn to use your device’s wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network devices
anywhere an access point or wireless hotspot is available.
Your device uses non-harmonized frequency and
is intended for use in all European countries. The
WLAN can be operated in the EU without restriction
indoors, but cannot be operated outdoors in France.