Samsung YP-G1CW-XAA - Manual (Page 93)

Settings 92
Keep the touch screen or keypad facing up during •
calibration.
Calibration may take some time, depending on
•
your location or other circumstances.
Calibration may not be possible in areas with
•
strong magnetic fields. If the calibration fails, move
to another area and try again.
If you enter an area with strong magnetic fields
•
after calibration, your device will automatically
attempt to recalibrate the geomagnetic sensor.
The geomagnetic sensor in your device does
•
not support the bird’s-eye view, which fixes the
directions. Therefore, a small error may occur in
measuring angles and cause a map to be turned
upside-down.
Auto-rotate screen • : Set whether or not to rotate the
content automatically when the device is rotated.
Animation
• : Set the device to display animation when
you switch between windows.
Screen timeout
• : Set the length of time the device waits
before turning off the display's backlight.
Power saving mode
• : Activate Power saving mode. In
Power saving mode, the device saves power by adjusting
the white balance on the display and the brightness
level.
Horizontal calibration
• : Calibrate the geomagnetic
sensor when the compass or augment reality application
shows incorrect information.