Samsung HPR8082X-XAA - Manual (Page 43)

43
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
Set the PIP Mode to On. (Refer to page 42)
1 Press the MENU button. Press the ▲ or ▼ button to select
“PIP”, then press the ENTER button.
2 Press the ▲ or ▼ button to select “Source”, then press
the ENTER button.
3 Press the ▲ or ▼ button to cycle through all of the
available signal sources: “AV1”, “AV2”, “S-Video1”,
“S-Video2”, “Component1”, “Component2”, “PC”, “DVI”
or “HDMI”.
Press the ENTER button.
4 Press the EXIT button to exit.
PIP : On
Source : TV
Swap
Size
:
Position :
Sound Select : Main
PIP T V
Move Enter Return
PIP : On √
Source : AV1 √
Swap √
Size : √
Position : √
Sound Select : Main √
PIP T V
Move Enter Return
AV1
AV2
S-Video1
S-Video2
Component1
Component2
Note
• The signal from these inputs will not appear if you
have not connected any equipment to the PDP
Monitor's respective input jacks.
†
Note
• The same source cannot be selected on both the main and sub screens.
BN68-00852B-00Eng(036~051) 11/22/05 1:47 PM Page 43