Samsung HPR8082X-XAA - Manual (Page 67)

67
• The interlace mode is not supported.
• The PDP Monitor operates abnormally if a non-standard video format is selected.
• The table above conforms to IBM/VESA regulations and is based on using the Analog Input.
Notes
• The PC text quality is optimum in WUXGA mode (1920 x 1080p@60Hz).
• When this PDP Monitor is used as a PC display, 32-bit color is supported.
• Depending on the manufacturer, your PC display screen might appear different.
(and depending on your particular version of Windows.)
Check your PC instruction book for information about connecting your PC to a PDP Monitor.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4KHz (horizontal).
• In some cases, abnormal signals (such as stripes) might appear on the PDP Monitor screen when the
PC power is turned off (or if the PC is disconnected). If so, press the SOURCE button on the remote
control or SOURCE button on the front panel to enter the VIDEO mode. Also, make sure that the
PC is connected.
• The chart above applies to DVI or PC input.
Notes
Both screen position and size will vary, depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Video Signal
VGA
SVGA
XGA
SXGA
WUXGA
Resolution
(Dot X Line)
Vertical
Frequency(Hz)
640 X 350
720 X 400
640 X 480
800 X 600
1024 X 768
1280 X 1024
1920 X 1080
(Reduced Blanking)
70
70
60
72
75
56
60
72
75
60
70
75
60
75
60
Horizontal
Frequency(KHz)
31.5
31.5
31.5
37.9
37.5
35.1
37.9
48.1
46.9
48.4
56.5
60
64
80
66.6
Vertical
Polarity
N
P
N
N
N
P/N
P
P
P
N
N
P
P
P
N
Horizontal
Polarity
P
N
N
N
N
P/N
P
P
P
N
N
P
P
P
P
P: Positive / N : Negative
BN68-00852B-00Eng(062~077) 11/22/05 1:52 PM Page 67