Samsung HT-AS720ST-XAA - Manual (Page 26)

26
Setting HDMI AUDIO
You can set HDMI audio settings.
√
Press SETUP/MENU button, and then press the ENTER
button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press button to select the “HDMI AUDIO”, and then
press the ENTER button.
• “HDMI : AVR” appears on the display.
Press …† button to set the HDMI audio.
• Each time you press this button, HDMI : AVR ➝ HDMI : TV will be selected
in turn.
1
2
3
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
• AVR : Audio is played on this product.
• TV : Audio is played on a TV connected to the HDMI OUT jack and no audio is
played on this product.
Setting HDMI AUDIO
• HDMI AUDIO setting is available only when the HDMI output is
connected to a TV.
• If you do not hear sound from the TV, should change the HDMI audio
output setting for your DVD PLAYER or SAT to PCM.
Before using!
• Press the INPUT MODE button to select HDMI1 or HDMI2. (see page 21)
• If you select Digital (Optical, Coaxial) or Analog, the HDMI audio setting will be
deactivated.
HT-AS720S-XAA-ENG 2007.8.21 6:8 PM Page 26