Samsung HT-AS720ST-XAA - Manual (Page 33)

33
ENG
OPERA
TION
Setting NEO:6 mode
You can play back 2 channel sound over 6.1 channels when enjoying music or a movie.
Press SETUP/MENU button, and then press the ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press button to select the “NEO:6 MODE”, and then
press the ENTER button.
• “CEN -- IMG : 2” appears on the display.
Press …† button to set the sound image you want.
• You can set the sound image from 0 to 5.
• This parameter adjusts the height of the center image through the front and
center speakers. “0” is the lowest while “5” is the highest.
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
REMOTE CONTROL
1
2
3
This mode decodes 2 channel signals to a high precision digital matrix decoder.
for 6.1 channel sound.
• MUSIC : NEO:6 MUSIC mode is optimized for music playback
• CINEMA : NEO:6 CINEMA mode is optimized for movie playback.
NEO : 6 Mode
• NEO:6 mode cannot be used with DTS and Dolby Digital multi channel signals.
• Pro Logic works only for PCM audio signals with sampling frequencies of
32KHz, 44KHz or 48KHz.
If your TV (or screen) is installed high on a wall, you can raise the center
sound image of the front and center speakers to compensate.
To set the height of the center sound image
Press NEO:6 MODE button.
• Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
Press SURROUND button briefly to select “NEO:6” mode.
• Each time you press this button, DPLIIx ➝ NEO:6 ➝ SFE ➝ STEREO will
be selected in turn.
Press SELECT( ) button.
• Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
MAIN UNIT
1
2
,
HT-AS720S-XAA-ENG 2007.8.21 6:8 PM Page 33