Samsung HT-AS720ST-XAA - Manual (Page 35)

35
ENG
OPERA
TION
Setting Tone Control
This function allows setting up the tone quality of the front speakers.
Press SETUP/MENU button, and then press the ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press button to select “TONE CONTROL”, and
then press the ENTER button.
Press button.
• Each time you press this button, BASS ➝ TREBLE ➝ TONE : OFF will be
selected in turn.
• If it is set to TONE: OFF, the Tone Control function will be disabled.
Press …† button to set the tone control you want.
• You can adjust it from -6 to +6dB by 1 step.
• The sound gets smaller at -6dB and louder at +6dB.
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
1
2
3
4
• Tone Control function is available only in the Stereo mode.
HT-AS720S-XAA-ENG 2007.8.21 6:8 PM Page 35