Care and cleaning of the glass cooktop, Normal daily use cleaning, Removing burned-on residue – Samsung FE710DRS-XAA User Manual

Page 61: Removing heavy, burned-on residue

Advertising
background image

Maintaining your appliance _61

MAINT

AINING Y

OUR APPLIANCE

CARE AND CLEANING OF THE GLASS COOKTOP

Normal daily use cleaning

Use only a ceramic cooktop cleaner or the cleaner supplied with this appliance on the glass

cooktop. Other creams may not be as effective.

By following these directions, you can maintain and protect the surface of your glass cooktop.

• Before using the cooktop for the first time, clean it with a ceramic cooktop cleaner or the

included cleaner. This helps protect the top and makes cleanup easier.

• Use the ceramic cooktop cleaner or the included cleaner daily. This will help keep the cooktop

looking new.

• Shake the cleaning cream well. Apply a few drops of cleaner directly to the cooktop.

• Use a paper towel or a cleaning pad for ceramic cooktops to clean the entire cooktop surface.

• Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse.

DAMAGE to your glass surface may occur if you use scrub pads other than those

recommended.

Removing burned-on residue

1. Allow the cooktop to cool.
2. Spread a few drops of ceramic cooktop cleaner

on the entire burned residue area.

3. Using the included cleaning pad for ceramic

cooktops, rub the residue area, applying pressure

as needed.

4. If any residue remains, repeat the steps listed

above as needed.

5. For additional protection, after all residue has been

removed, polish the entire surface with ceramic

cooktop cleaner and a paper towel.

Removing heavy, burned-on residue

1. Allow the cooktop to cool.
2. Use a single-edge razor-blade scraper at

approximately a 45 ° angle against the glass

surface and scrape the soil. It will be necessary to

apply pressure in order to remove the residue.

3. After scraping with the razor scraper, spread a few

drops of ceramic cooktop cleaner on the entire

burned residue area. Use the included cleaning

pad to remove any remaining residue. (Do not

scrape the seal.)

4. For additional protection, after all residue has

been removed, polish the entire surface with the

included cooktop cleaner and a paper towel.

WARNING

FE710DRS_XAA_DG68-00333A-07.indd 61

31/10/2012 17:31:31

Advertising