Samsung SPH-M220DAASPR - Manual (Page 33)

Phone Basics
Section 2A. Phone Basics 19
Making and Answering Calls
Making Calls
Placing a call from your wireless phone is as easy as
making a call from any landline phone. Enter the
number, press
, and you’re on your way to clear
calls.
1. Make sure your phone is on.
2. Enter a phone number from standby mode. (If you
make a mistake while dialing, press
to erase
the numbers.)
3. Press . (To make a call when you are roaming
and Call Guard is enabled, press and then
press . See “Using Call Guard” on page 58.)
4. Press or close the phone when you are
finished.
You can also place calls from your phone by using
Speed dialing numbers from your Contacts (page 28),
using Voice Dial (page 80), and using your Call History
listings (page 61).
Dialing Options
When you enter numbers in standby mode, you will
see a variety of dialing options displayed as softkeys on
the phone’s screen.
To send a message to the number, press Send Msg
(left softkey).
– or –
To initiate a dialing option, press Options (right softkey)
and choose one of the following options.
ⅷ Speed Dial: Enter a two digit number (2–99) to display
the entry contained in the speed dial location you
entered (if applicable). Press
to dial the speed
dial number. (See “Assigning Speed Dial Numbers”
on page 68.)
Tip To redial your last outgoing call, press twice.
When making calls off the Sprint National Network,
always dial using 11 digits (1 + area code + phone
number).
Sprint M220.book Page 19 Wednesday, May 6, 2009 3:06 PM