Answering calls – Samsung SPH-M220DAASPR User Manual

Page 34

Advertising
background image

20

Section 2A. Phone Basics

4-Digit Dial:

Enter four digits to dial a phone number

that matches from the list of numbers currently in
your Contacts that ends with the four digits you enter.
(See “Using Abbreviated Dialing” on page 27.)

Dial:

Dials the number or digits displayed.

Send Msg:

Sends a text message, picture message, or

SMS Voice message, with attachments to the
number being dialed.

Save:

Enter a seven-digit or ten-digit number (phone

number and area code) and press

Options > Save

to

save the phone number in your Contacts. (See
“Saving a Phone Number” on page 25.)

Find:

Enter a digit or string of digits and press

Options

(right softkey) to display Contacts entries that contain
the entered numbers. (See “Finding a Phone
Number” on page 25.)

Hard Pause:

Enter digits and then use this feature to

enter a hard pause within a number string (the
phone waits for user input). To continue dialing, you
must press the

key. (See “Dialing and Saving

Phone Numbers With Pauses” on page 26.)

2sec Pause:

Enter digits and then use this feature to

enter a 2 second delay within a number string (the
phone continues dialing after 2 seconds without any
additional keys being pressed). (See “Dialing and
Saving Phone Numbers With Pauses” on page 26.)

Answering Calls

1.

Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)

2.

Press

to answer an incoming call. (Depending

on your settings, you may also answer incoming
calls by opening the phone or by pressing any
number key. See “Call Answer Mode” on page 48
for more information.)

Tip

To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed
dial number is two digits, enter the first digit, and then
press and hold the second digit. (For information on
setting up speed dial numbers, see “Assigning
Speed Dial Numbers” on page 68
.) (This feature will
not work when you are roaming off the Sprint
National Network; when roaming you must dial using
eleven digits [1 + the area code + the seven-digit
phone number].)

Sprint M220.book Page 20 Wednesday, May 6, 2009 3:06 PM

Advertising