Samsung SPH-M220DAASPR - Manual (Page 53)

Se
ttin
g
s
Section 2B. Settings 39
Alert Notification
Set your phone to alert you with an audible tone when
you change service areas, once a minute during a
voice call, or when a call has been connected.
1. Press Menu > Settings > Sounds > Alerts .
2. Select Beep each minute , Out of Service , Connect ,
Signal Fade/Call Drop , or Power On/Off and press .
3. Select On or Off and press .
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
ᮣ With the phone open, press and hold the volume
button down in standby mode. (The screen will
display “Silence All.”)
To deactivate Silence All:
ᮣ Press the volume button up repeatedly to select a
volume level.
Display Settings
Changing the Text Greeting
A text greeting is displayed on your phone’s screen in
standby mode. Choose the phone’s default greeting
(“Sprint”) or enter your own custom greeting.
1. Press Menu > Settings > Display > Main Screen >
Foregrounds > Greeting .
2. Select Sprint or Custom .
Ⅲ If you select Custom , enter a custom greeting and
press . (See “Entering Text” on page 29.) (Use
the key to erase the existing greeting.)
Changing the Backlight Time Length
Select how long the display screen remains backlit
after any keypress is made.
1. Press Menu > Settings > Display > Backlight .
2. Select a time setting and press .
Ⅲ Select Always on, 30 seconds, 15 seconds, 8 seconds
or Dim only .
Sprint M220.book Page 39 Wednesday, May 6, 2009 3:06 PM