Samsung SCH-R220ZSADYN - Manual (Page 19)

Section 1
Section 1
Getting Started 27 26 Getting Started
Using Your Jitterbug For The First Time
If you have not activated your Jitterbug, please refer to page 1 before
turning your Jitterbug on.
Turning Your Jitterbug On:
1. Open your Jitterbug.
2. Press the on
off
button in the upper right corner of the keypad until your Jitterbug
turns on and the GreatCall logo appears on the Inside Display.
3. When you hear a dial tone, your Jitterbug has service and is ready to use.
If a connection is not possible, a “No Service” message will appear on the
Outside Display and a dial tone will not be heard.
Your Main Screen:
For your convenience, each time you turn your Jitterbug
on, you will see the Main Screen as shown in the following
diagram:
The Main Screen will display your Jitterbug phone
number at the top of the screen as shown in the
following screen as,
“My # 800-733-6632.”
The Main Screen is where you access the features on your
Jitterbug. Your Jitterbug is designed with the following six
features installed in your phone:
1. Phone Book – store up to 50 of the names and numbers that you call most
often. Operators can even set-up the Phone Book for you. Please reference
Section 3, page 61 for more information.