Samsung SCH-R220ZSADYN - Manual (Page 31)

Section 2
Section 2
Placing And Receiving Calls 51 50 Placing And Receiving Calls
Answering A Call
Your Jitterbug rings or vibrates (depending on how you set the ringer volume
level) to indicate an incoming call. Additionally, there are other indications of
incoming calls:
• The Light Indicator on the front of your Jitterbug flashes.
• The name or phone number of the person calling will
appear on the Outside Display.
• If the caller’s number is stored in your Phone Book then
the name and number will appear on the Inside Display, as
shown.
• If the caller cannot be identified, you may see the phone
number or you may see “Unavailable” or “Restricted.”
We recommend keeping your Jitterbug on at all times and charging it
overnight so you can always be connected.
Answering A Call When Your Jitterbug Is Closed:
1. If the caller’s name and number are stored in your Phone
Book or the caller ID is recognized, either the name or the
phone number appears on the Outside Display, as shown.
2. Open your Jitterbug when you hear it ring. The Ring Tone
will stop when the phone is opened.
3. A “Connected” message will appear on the Inside Display
and the caller’s voice can be heard through the earpiece
speaker.