Samsung SM-P605VZKEVZW - Manual (Page 20)

14
The FCC SAR limit incorporates a substantial margin of
safety to give additional protection to the public and to
account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the mobile device
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the mobile device while operating
can be well below the maximum reported value. This is
because the mobile device is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower
the power output of the mobile device.
Before a new model mobile device is available for sale
to the public, it must be tested and certified to the FCC
that it does not exceed the SAR limit established by the
FCC. Tests for each model mobile device are performed
in positions and locations (e.g. near the body) as
required by the FCC.
For typical operations, this mobile device has been
tested and meets FCC SAR guidelines.
VZW_P605V_JB_Eng_PSW_.book Page 14 Thursday, March 6, 2014 12:46 PM