Audiovox MS4150RS - Manual (Page 24)

The “SOUND” menu
In the “ SOUND” menu, you can set your navigation
radio’s sound and several other sound reproduction
parameters to your own preferences.
The sound settings for bass and treble/tone are valid
for the currently active sound source (radio, CD or
CDC).
☞
Press SOUND.
:
The “ SOUND” menu is displayed.
The following options are available:
Sound settings
☞ Select the desired option by turning the right ro-
tary control.
☞
Press the right rotary control in order to activate
the setting.
☞
Move the slide control to the desired setting by
turning the right rotary control.
☞ Press the right rotary control in order to store the
setting.
– Bass: Setting the bass (low tones).
– Treble: Setting the treble (high tones).
– Bal: Setting of volume balance left <–> right.
– Fader: Setting the volume distribution rear <–> front.
Slide control left: rear
Slide control right: front
✎
Sound settings cannot be performed for navigation information, traffic announce-
ments and telephone operation.
Loudness
☞ Activate this function to increase low and high tones at low volume settings.
✎
Selecting one of the pre-set sound styles deactivates the loudness function.
Sound Style
☞ Select one of the pre-set sound styles.
☞
Select “ User” to retain your own bass and treble settings.
✎
For each sound source, the sound style is stored separately.
SDVC (speed-dependent volume control)
To compensate for environmental noise, the volume for audible information increases
as a function of the speed.
☞
Choose a setting for the speed-dependent increase of the volume.
☞
Select OFF to deactivate the function or select 1 to 5 to choose the desired volume
increase. 1 is the lowest, 5 the highest volume increase.
20
SOUND SETTINGS
SOUND
Sound Settings
Loudness
Sound Style
SDVC: 2
SOUND SETTINGS
Bass
Treble
Balance
Fader