Audiovox MS4150RS - Manual (Page 57)

Guidance screen
Here you can select the information which should appear on the guidance screen.
■ Show event
☞
Select whether traffic obstructions on your route should appear in the top line of
the guidance screen or not.
✎
This feature is not available in the U.S.
■ Remain. distance
☞ Select whether the distance-to-go to the destination or via point should appear in
the status field of the guidance screen or not.
■ Times
☞ Select which times should appear in the status field of the guidance screen. The fol-
lowing options are available:
– Current time
– Time of arrival
– Remaining time
– No time display
Dyn. route sett.
Settings for dynamic route planning
✎
This feature is not available in the U.S.
Language
☞
Choose one of the two languages loaded in the system,
or:
☞
Select “ Other language” to replace one of the two loaded languages with another
language from the system software CD (included).
☞
Select the language to be replaced.
:
You will be prompted to insert the software CD.
☞
Insert the language CD in the CD player of the radio.
☞ Follow the system instructions for loading other languages.
■ Turn now advice
If this option is activated, an additional prompt (e.g. “Now turn right”) will be output
directly before a turn-off.
✎
This prompt is activated by default.
Measuring units
☞
Choose between the following units of measurement for distance:
– Metric: Display in kilometers and meters.
– Anglo: Display in miles and yards.
– American: Display in miles, half and quarter miles and feet.
NAVIGATION
53