Audiovox MS4150RS - Manual (Page 9)

Connection overview ISO chamber B (loudspeakers), Fig. 3:
Note: The cable colors correspond to the VDO Dayton standard.
Pin Wire color Connection to loudspeaker
B1 Blue + Rear right (RR+)
B2 Blue/black - Rear right (RR-)
B3 Grey + Front right (FR+)
B4 Grey/black - Front right (FR-)
B5 Green + Front left (FL+)
B6 Green/black - Front left (FL-)
B7 White + Rear left (RL+)
B8 White/black - Rear left (RL-)
A
Use only loudspeakers of 4 Ohms impedance.
A
Do not connect the loudspeakers to earth.
A
Do not connect the booster/amplifier directly to the loudspeaker outputs.
A
Do not connect loudspeakers via an external fader.
Connections ISO chamber C, Fig. 4 - 6
■ Yellow connector C1 (line-out):
An amplifier with additional loudspeakers can be connected to the unit via this
connector.
– Connect the “FRONT” lead to the front left (white) and front right (red) channel of
the amplifier.
– Connect the “REAR” lead to the rear left (white) and rear right (red) channel of the
amplifier.
– Connect the blue/yellow lead to the remote control (REMOTE) of the amplifier.
■ Green connector C2
Telephone input (adapter cable accessories):
Connect the loudspeaker output of the mobile phone or hands-free unit to the yellow
connector at the end of cable C2. For information about setting the telephone attributes,
refer to “INITIALIZATION” ➽ Page 29.
■ Blue connector C3 (CD changer):
You can connect a digital AUDIOVOX CD changer to the unit. For further information
call AUDIOVOX technical support.
INSTALLATION INSTRUCTIONS
5