Figure 37: installing the rack mount screws – Allied Telesis AT-SBx81CFC960 User Manual

Page 100

Advertising
background image

Chapter 5: Installing the Chassis in an Equipment Rack

100

Section II: Installing the Chassis

Figure 37. Installing the Rack Mount Screws

5. Tighten all eight screws to secure the chassis to the equipment rack,

Allied Telesis recommends tightening the screws to 10 inch-lbs.

6. Go to “Removing the Shipping Brace” on page 101.

Advertising
This manual is related to the following products:
See also other documents in the category Allied Telesis Computer hardware: