Allied Telesis AT-SBx81CFC960 - Manual (Page 302)

Chapter 15: Building a Stack
302 Section III: Building a Stack with VCStack Plus
Figure 188. Positioning the Handle on the Transceiver
6. Connect the fiber optic cable to the transceiver, as shown in
Figure 189. The connector on the cable should fit snugly into the port,
and the tab should lock the connector into place.
Figure 189. Connecting a Fiber Optic Cable to a Stacking Transceiver
7. Repeat this procedure to cable all the stacking transceivers on both
switches. Afterwards, go to “Powering On the Stack” on page 303.
Handle