Allied Telesis AT-SBx81CFC960 - Manual (Page 183)

SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section II: Installing the Chassis 183
4. Secure the wire with the nut and washer removed in step 2, and an 8
mm wrench, as shown in Figure 123.
Figure 123. Securing the Bare Grounding Wire to the Grounding Post
Allied Telesis recommends tightening the nut and washer to 26 inch-
lbs.
After connecting the grounding wire, go to “Choosing a Method for
Attaching the Power Wires” on page 184.