Allied Telesis SwitchBlade x3106 - Manual (Page 203)

203
Chapter 9
Troubleshooting
This chapter contains information on how to troubleshoot the SwitchBlade
x3106 product.
Note
If you are unable to resolve a hardware problem after following the
instructions in this chapter, contact Allied Telesis Technical Support
for further assistance. Refer to “Contacting Allied Telesis” on
page 17 for contact information.
The following troubleshooting information is available:
 “AT-SBxPWRSYS1 and AT-SBxPWRPOE1 AC Power Supplies” on
page 204
 “AT-SBxPWRSYS1 DC Power Supply” on page 205
 “Ethernet Line Cards” on page 207
 “Twisted Pair Ports” on page 209
 “Power Over Ethernet” on page 211
 “Fiber Optic Transceivers” on page 213
 “AT-SBx31CFC Controller Fabric Card” on page 215
 “AT-SBxFAN06 Fan Module” on page 216
 “Local (Out-of-Band) Management Session” on page 217
 “Power Supply Interfaces (Opto-couplers)” on page 218