Displaying statistics, Displaying port statistics, Figure 13. statistics menu – Allied Telesis AT-S79 User Manual
Page 55
AT-S79 Management Software User’s Guide
Section I: Using the Menus Interface
55
Displaying Statistics
The procedure in this section describe how to display port statistics.
Displaying Port
Statistics
To display port statistics, perform the following procedure:
1. From the Main Menu, type S to select Statistics.
The Statistics Menu is shown in Figure 13.
Figure 13. Statistics Menu
2. Type S to select a port.
The following prompt is displayed:
Select port number>
3. Enter the number of the port whose statistics you want to view. Then
press Return.
Main Menu-> Statistics Menu
Port: 1
Elapsed Time Since System Reset: 000:00:11:54
<Counter Name>
<Total>
<Avg./s>
Total RX Bytes
0
0
Total RX Pkts
0
0
Good Broadcast
0
0
Good Multicast
0
0
CRC/Align Errors
0
0
Undersize Pkts
0
0
Oversize Pkts
0
0
Fragments
0
0
Jabbers
0
0
Collisions
0
0
64-Byte Pkts
0
0
65-127
0
0
128-255
0
0
256-511
0
0
512-1023
0
0
1024-1522
0
0
-------------------------------<COMMAND>------------------------------
[S]elect/[N]ext/[P]rev. Port Since [U]p [R]eset [S]top Refresh [Q]uit
Command>