Allied Telesis AT-WNP300N - Manual (Page 11)

AT-WNP300N IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter Installation Guide 11
Chapter 2: Installation
Reviewing Safety Precautions
Please review the following safety precautions before you begin to install the AT-WNP300N
IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter.
Warning
Do not work on equipment or cables during periods of lightning activity.
Warning
Power off your PC and unplug the power cord before installation.
Warning
Operating Temperature. This product is designed for a maximum ambient temperature of 40°C.
All Countries: Install product in accordance with local and National Electrical Codes.
Caution
Do not install in direct sunlight, or a damp or dusty place.
Unpacking the Wireless Adapter
To unpack the AT-WNP300N IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter, perform the following
procedure:
1. Remove all components from the shipping package.
Note: Store the packing material in a safe location. You must use the original shipping material
if you need to return the unit to Allied Telesis.
2. Place the adapter on a secure, level surface.
3. Ensure that the following hardware components are included in your shipping package. If any item is
missing or damaged, contact your Allied Telesis sales representative for assistance.
Package Contents
•
One AT-WNP300N IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter
•
Two antennas
• Low profile bracket
• Driver and Utility CD-ROM
• This installation guide
Hardware Installation
To install AT-WNP300N IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter into your PC, perform the
following procedure:
Note: AT-WNP300N IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter is compatible with
Windows 2000, XP, and Vista. Check your operating system before installation.
Note: A screw driver is necessary to process the following operation.