Installing the driver and the utility – Allied Telesis AT-WNP300N User Manual
Page 13
Advertising
AT-WNP300N IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter Installation Guide
13
Installing the Driver and the Utility
To make the adapter work properly, you need to install the driver and the utility. Please perform the
following procedure:
1.
Switch on your PC and insert the CD-Rom, which is contented in the shipping package.
2.
When you see the notification as shown in Figure 5, click “Cancel” to skip the process.
Figure 5: Canceling Hardware Notification
3.
Run the CD-Rom. Click “Install” to start the installation, as shown in Figure6.
Figure 6: Starting the Installation
4.
Click “Finish” when the installation is completed, as shown in Figure 7.
Figure 7: Completing the Installation
Advertising