Allied Telesis AT-2973T (NetExtreme II) - Manual (Page 40)

Chapter 3: Installing Broadcom Boot Agent Driver Software
40
Setting Up MBA in a Server Environment
Red Hat Linux
PXE Server
The Red Hat Enterprise Linux distribution has PXE Server support. It
allows users to remotely perform a complete Linux installation over the
network. The distribution comes with the boot images boot kernel
(vmlinuz) and initial ram disk (initrd), which are located on the Red Hat
disk#1:
/images/pxeboot/vmlinuz
/images/pxeboot/initrd.img
Refer to the Red Hat documentation for instructions on how to install PXE
Server on Linux.
However, the Initrd.img file distributed with Red Hat Enterprise Linux, does
not have a Linux network driver for the Broadcom NetXtreme II adapters.
This version requires a driver disk for drivers that are not part of the
standard distribution. You download the driver software files from the
Allied Telesis web site.
MS-DOS UNDI/
Intel APITEST
To boot in MS-DOS mode and connect to a network for the MS-DOS
environment, download the Intel PXE PDK from the Intel website. This
PXE PDK comes with a TFTP/ProxyDHCP/Boot server. The PXE PDK
can be downloaded from Intel at
http://downloadcenter.intel.com/
Product_Filter.aspx?ProductID=412&lang=eng .