Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 324)

AlliedView™-EMS 4.0.2 Device Management Guide Page 324 of 441
Note - The current firmware version does not allow the following parameters to be
set to '0'.
•
Partner Administrative System Priority
•
Partner Administrative Port
•
Partner Administrative Port Priority
Enable
Enables the port.
Disable
Disables the port.
Stacking Menu
From the Stacking menu, you can view and edit the Stacking MIB.
Stack Status
Displays the stack status information of the device.
Stack Info
Displays information about the stacked devices.
Note - The current firmware version returns the value 'builtinStackingPorts' for the
Active Hardware parameter when an AT-Stack-XG module is installed.
AT-x600 Series