Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 36)

AlliedView™-EMS 4.0.2 Device Management Guide Page 36 of 441
Note - The current firmware version does not allow the Trunk ID After Reset
parameter to be configured.
POE Info
MCU Info
Displays POE device's Microcontroller information.
POE Config
Displays POE device's configurations.
Note - AT-8000GS/24POE: When multiple units of the AT-8000GS series are
stacked together, the current firmware version does not allow the Maximum PSE
Power parameter to be configured to 'none' if the Unit ID of the device is '3', '4', '5'
or '6'.
Socket Info
Displays the sockets information which are currently open in the system.
Management Info
General Management
Displays common management information.
Note - The current firmware version does not allow the Reboot Delay parameter to
be configured.
Note - Configuring the Action parameter to 'delete lan tab' will not return an error
message.
Flash File System
Basic Info
Displays the flash file size of the device.
File Lists
Displays the device's list of files.
File Copy Info
Displays the current history index and messages for file copy.
Jumbo Frames
Displays the current jumbo frames status.
Management ACL
Basic Info
Displays basic information about the management access list.
Access Lists
Displays information about access lists.