Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 415)

AlliedView™-EMS 4.0.2 Device Management Guide Page 415 of 441
Note - The SFP port images will always be fiber optic ports even if the actual SFP modules
inserted in the SFP slots have copper ports. This is because the current firmware version
does not allow Device Manager to identify the port type of SFP modules inserted in the SFP
slots.
Module Info
Note - The current firmware version does not return any value for the Module
Revision parameter.
Note - The current firmware version does not return the correct value for the
Module MAC Address parameter.
Note - AT-CV5M01: Configuring the Module Operation Mode parameter will result
in the error message: "The error occurred with 'Set' operation. Error: time out
occurred".
Port Info
Note - The current firmware version does not allow any of the parameters under
this table to be configured.
Converteon Series Modules