Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 253)

Note - The current firmware version does not allow the following parameters to be
configured:
ƒ
Repeating Start
ƒ Repeating End
ƒ Annual Start
ƒ Annual End
SNTP
Displays the SNTP configuration of the system.
System Log Server Config
Displays basic information and configuration of the System Log Server.
Reset Cold
Performs a hardware reset.
Reset Warm
Performs a software reset.
Note - This function is currently not supported.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Routing Menu
From the Routing menu, you can view and edit various routing protocols such as RIP,
DVMRP, OSPF, PIM and IPM.
IP
Interface Info
Displays information about IP interfaces.
Note - The current firmware version does not allow the following parameters to be
configured:
ƒ Interface Name
ƒ IP Subnet Mask
ƒ VLAN Name
ƒ Operation Mode
ƒ Secondary IP
AlliedView™-EMS 4.0.1 Device Management Guide Page 253 of 411