Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 398)

PowerBlade Modules
This section describes the modules supported by Device Manager. If modules are installed
on the PowerBlade chassis at the time Device Manager is called, they will be displayed in
their corresponding slots on the chassis image.
• AT-PB10 Series Media Converter Modules
• AT-PB100 Series Media Converter Modules
• AT-PB200 Series Switch Modules
• AT-PB300 Series Media Converter Modules
• AT-PB1000 Series Media Converter Modules
AT-PB10 Series Media Converter Modules
PB13 PB14 PB15
LED State Description
ML Green The Missing Link feature is enabled
Note - The Port A Mode and the Port B Mode parameters return 'not supported' for these
modules.
Note - Active ports on PB13 and PB14 do not turn red when disabled using the Omega
interface.
Note - The Link Test parameter of PB15 has a fixed value of 'hardware-link-test' and cannot
be modified.
AlliedView™-EMS 4.0.1 Device Management Guide Page 398 of 411