Stacking menu – Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT User Manual
Page 353
Note
- The current firmware version does not allow the Actor Administrative Status
and Partner Administrative Status parameter to be configured. Attempting to
configure this parameter to any valid value will result in the error "The error
occurred with 'Set' operation. Error: gen error".
Note
- The current firmware version does not allow the following parameters to be
set to '0'.
Partner Administrative System Priority
Partner Administrative Port
Partner Administrative Port Priority
Enable
Enables the port.
Disable
Disables the port.
Stacking Menu
From the Stacking menu, you can view and edit the Stacking MIB.
Stack Status
Displays the stack status information of the device.
Stack Info
Displays information about the stacked devices.
AT-x900-24X Series (AlliedWare Plus)
AlliedView™-EMS 4.0.1 Device Management Guide
Page 353 of 411