Allied Telesis AT-S97 - Manual (Page 197)

197
Chapter 10
Telnet Server Commands
This chapter contains the following sections:
ˆ “Overview” on page 198
ˆ “TELNET DISABLE” on page 200
ˆ “TELNET ENABLE” on page 201
ˆ “TELNET SHOW” on page 202
Note
Remember to save your parameter changes in the active master
configuration file with the CONFIG SAVE command. For information,
refer to “Saving Your Configuration Changes” on page 23 or
“CONFIG SAVE” on page 161.