Allied Telesis AT-S97 - Manual (Page 207)

AT-S85 and AT-S97 Management Software User’s Guide
207
Examples
This command changes the set community string to “snmpsecret1.”
snmp set set-community=snmpsecret1
This command changes the get and trap community strings to “mod1get”
and “mod1trap,” respectively:
snmp set get-community=mod1get trap-community=mod1trap
This command designates as trap receivers the IP addresses 168.12.1.1
and 168.12.1.12, assigning them to MGRIP1 and MGRIP2:
snmp set mgrip1=168.12.1.1 mgrip2=168.12.1.12
This command removes an IP address of a trap receiver from MGRIP4
without assigning a new value:
snmp set mgrip4=0.0.0.0