Allied Telesis AT-S97 - Manual (Page 49)

AT-S85 and AT-S97 Management Software User’s Guide
49
Command
Summary
Table 3 summarizes the IP configuration commands.
Table 3. IP Configuration Commands
Command Description
IP DHCP DISABLE on
page 50 Deactivates the DHCP and
BOOTP clients on the
management module.
IP DHCP ENABLE on page 51 Activates the DHCP and BOOTP
clients on the management
module.
IP SET on page 52 Manually sets the IP configuration.
IP SHOW on page 54 Displays the IP address, subnet
mask, and default gateway of the
management module.