Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 586
Chapter 31: Port-based VLAN, Tagged VLAN, and Multiple VLAN Mode Commands
586
Section VI: Virtual LANs
add vlan=Service ports=7-8 frame=untagged
Using Syntax 2, you can add both types of ports with just one command:
add vlan=Service untaggedports=7-8 taggedports=5
AlliedWare Plus
Command
Syntax
To add untagged ports:
switchport access vlan
vid
To add tagged ports:
switchport trunk allow vlan add
vid
Mode
Port Interface mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
This example adds ports 5 and 7 as untagged ports to a VLAN with the
VID 12:
awplus> enable
awplus# configure terminal
awplus(config)# interface 5,7
awplus(config-if)# switchport access vlan 12
This example adds ports 18 to 21 and 24 as tagged ports to a VLAN with
the VID 7:
awplus> enable
awplus# configure terminal
awplus(config)# interface 18-21,24
awplus(config-if)# switchport trunk allow vlan add 7