Allied Telesis AT-S101 - Manual (Page 208)

Chapter 19: Access Control Policies
208
Displaying a Policy Sequence
To create a policy sequence, perform the following procedure:
1. From the menu on the left side of the home page, select the Access
Control Configuration folder.
The Access Control Configuration folder expands.
2. From the Access Control Configuration folder, select Policy
Sequence.
The Policy Sequence Page is displayed. See Figure 64.
Figure 64. Policy Sequence Page
3. Select a port with the pull-down menu next to the Select Port field.
4. Select Display by Index order to display the policy by the index
number or select Display by Sequence order to display the policy by
policy sequence.
See “Creating a Policy” on page 206 for information about a policy
index and a policy sequence.
5. Then click Apply to activate your changes.
6. From the menu on the left side of the page, select Save
Configuration to Flash to save your changes.