Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 16)

AlliedView™-EMS 3.11 Device Manager User’s Guide Page 16 of 130
2.2.1 Starting From Castle Rock SNMPc
To start Device Manager from SNMPc, double-click on a node icon on the map window. If
the node is supported by Device Manager, the main panel of the node is displayed.
Note that Device Manager and SNMPc run independently of each other, so exiting SNMPc
has no effect on Device Manager. Device Manager continues to run even after SNMPc stops
running. To exit Device Manager, select Exit from its File menu.
Starting from SNMPc
Note - SNMPv3: In order to start Device Manager in SNMPv3 mode, the node's Read/Write
Access Mode attribute should be set to SNMP V3 No-Auth, SNMP V3 Auth-MD5, SNMP V3
Auth-SHA , SNMP V3 Priv Auth-MD5, or SNMP V3 Priv Auth-SHA, depending on the SNMPv3
settings configured on the target device.