Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual
Page 61
AlliedView™-EMS 3.11 Device Manager User’s Guide
Page 61 of 130
Note
- It takes times to get values for many variables. To improve performance, you
can limit the number of variables to be displayed to about 10. You can further
improve performance by increasing the polling interval when the volume of the data
is high.
MIB display
MIB set
Sets a value for the MIB variable. Specify a variable and a value to set. You must
specify the variable with an instance number. For example, 'sysDescr.0' or
rptrMonitorPortEntry.1.8' are valid examples. If you specify a variable without an
instance such as 'sysDescr', the set operation cannot be performed.
Note
- The MIB set operation changes the data structure in the device's SNMP agent.
Take care when using this function.