Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 8)

AlliedView™-EMS 3.11 Device Manager User’s Guide Page 8 of 130
2.1 Starting From the Command Line
The command line interface is the most basic way to start Device Manager.
Topics:
• Command Syntax
• Target Host
• SNMP Version
• Get Community
• Set Community
• Trap Community
• Titlebar String
• User Account Name
• Security Level
• Authentication Protocol
• Authentication Password
• Privacy Protocol
• Privacy Password
• Trap Version
• Parameter File
2.1.1 Command Syntax
To start Device Manager from the command line, use the following syntax.
devicemanager [options]
You can specify the following options:
TargetHost
Target host's IP address or DNS host name.
SnmpVersion
SNMP version to be used.
GetCommunity
SNMP Get community string. This is used when retrieving MIB values.
SetCommunity
SNMP Set community string. This is used when modifying MIB values.
TrapCommunity
SNMP Trap community string. This is used when receiving Traps from agents.