Allied Telesis 9700 iMAP User Manual
Page 42
Connecting the local terminal and applying power
Power and startup sequence
ATI 9700 - Installation Guide (Initial Installation of the ATI 9700)
1-36
VxWorks Version 5.5 for IBM PowerPC 440GP Rev. 2.0
BSP version 1.2/3
Copyright Wind River Systems, Inc., 1984-2002
Memory Size: 255 MB
WDB Comm Type: WDB_COMM_END, State: Ready
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
********************
* WARNING: Debug IP mode is currently enabled.
********************
* WARNING: Standard Telesyn boot procedure has been disabled.
********************
System Time is 2004-07-19 09:55:41.005
System initializing...
/tffs/ - Volume is OK
Initialization completed successfully
User Access Verification
Username:
3.
Check for fault indicators by comparing the actual message with what is shown in Step 2
•
On the CM in slot 8/9, the LEDs should be as follows (for the active CM)