Document Outline

• Contents
  • Figure 1. Main Page 8
  • Figure 2. IP Setup Page 12
  • Figure 3. Save Configuration Page 13
  • Figure 4. Administration Page 15
  • Figure 5. Management Page 18
  • Figure 6. IP Access List Page 20
  • Figure 7. Reboot Page 23
  • Figure 8. Save Configuration Page 24
  • Figure 9. Physical Interface Page 26
  • Figure 10. Bandwidth Control Page 30
  • Figure 11. Power over Ethernet Page 36
  • Figure 12. Port Diagnosis Example 41
  • Figure 13. (SNMP) Community Table Page 46
  • Figure 14. (SNMP) Host Table Page 47
  • Figure 15. (SNMP) Trap Setting Page 49
  • Figure 16. Static Port Trunk Example 52
  • Figure 17. Trunking Page 54
  • Figure 18. Trunk Ports Selected 54
  • Figure 19. Mirroring Page 61
  • Figure 20. Ingress Ports Selected 62
  • Figure 21. Egress Ports Selected 62
  • Figure 22. Port-Based VLAN Page 71
  • Figure 23. Port-based VLAN Ports Selected 72
  • Figure 24. Tagged VLAN Page 74
  • Figure 25. Add Tagged VLAN Page 75
  • Figure 26. Tagged VLAN Ports Selected 76
  • Figure 27. VLAN Mode Page 78
  • Figure 28. Default Port VLAN & CoS Page 86
  • Figure 29. CoS Page 88
  • Figure 30. IGMP Snooping Page 94
  • Figure 31. Point-to-Point Ports 101
  • Figure 32. Edge Port 102
  • Figure 33. Point-to-Point and Edge Port 102
  • Figure 34. VLAN Fragmentation 103
  • Figure 35. Spanning Tree Page 104
  • Figure 36. Port Access Control Page 113
  • Figure 37. Port Access Control Status Page 116
  • Figure 38. Dial-In User Page 118
  • Figure 39. RADIUS Page 123
  • Figure 40. Traffic Comparison Chart Page 127
  • Figure 41. Sample Traffic Comparison Chart 130
  • Figure 42. Error Group Chart Page 131
  • Figure 43. Sample Error Chart 132
  • Figure 44. Historical Status Chart 133
  • Figure 45. Sample Historical Status Chart 135
  • Figure 46. Dynamic Addresses Page 140
  • Figure 47. Dynamic MAC Addresses Associated with a Port 141
  • Figure 48. Dynamic MAC Addresses Associated with a VLAN ID 141
  • Figure 49. Dynamic MAC Addresses Associated with a MAC Address 142
  • Figure 50. Static Addresses Page 144
  • Figure 51. Firmware Upgrade Page 148
• Figures
  • Table 1. Default Mappings of IEEE 802.1p Priority Levels to Priority Queues 83
  • Table 2. Customized Mappings of IEEE 802.1p Priority Levels to Priority Queues 83
  • Table 3. Example of Weighted Round Robin Priority 85
  • Table 4. Bridge Priority Value Increments 97
  • Table 5. STP Auto Port Costs 98
  • Table 6. RSTP Auto Port Costs 98
  • Table 7. RSTP Auto Port Trunk Costs 98
  • Table 8. Port Priority Value Increments 99
• Tables
• Preface
  • Where to Find Web-based Guides
  • Contacting Allied Telesis
    • Online Support
    • Email and Telephone Support
    • Warranty
    • Returning Products
    • Sales or Corporate Information
    • Management Software Updates
• Chapter 1
• Getting Started
  • Starting a Management Session
    • 1. In a web browser address box, enter the following IP address:
  • Quitting a Management Session
• Chapter 2
• Basic Switch Parameters
  • Configuring the IP Address, Subnet Mask, and Gateway Address
    • 1. From the main menu, select System > IP Setup.
  • Enabling or Disabling DHCP
    • 1. From the main menu, select System > IP Setup.
  • Configuring System Administration Information
    • Adding an Administrative User
      • 1. From the main menu, select System > Administration.
    • Modifying an Administrative User
      • 1. From the main menu, select System > Administration.
    • Deleting a User
      • 1. From the main menu, select System > Administration.
    • Enabling or Disabling Password Protection
      • 1. From the main menu, select System > Administration.
  • Configuring the System Management Information
    • 1. From the main menu, select System > Management.
  • Setting Up IP Address Access
    • Adding an IP Address to the IP Access List
      • 1. From the main menu, select System > IP Access List.
    • Modifying an IP Address in the IP Access List
      • 1. From the main menu, select System > IP Access List.
    • Removing an IP Address from the IP Access List
      • 1. From the main menu, select System > IP Access List.
    • Enabling or Disabling IP Access
      • 1. From the main menu, select System > IP Access List.
  • Rebooting the Switch
    • 1. From the main menu, select System > Reboot.
  • Returning the AT-S88 Management Software to the Default Values
    • 1. From the main menu, select Save Configuration.
• Chapter 3
• Port Configuration
  • Enabling or Disabling a Port
    • 1. From the main menu, select Physical Interface.
  • Setting a Port’s Speed and Duplex Mode
    • 1. From the main menu, select Physical Interface.
  • Enabling or Disabling Flow Control
    • 1. From the main menu, select Physical Interface.
  • Configuring Bandwidth Control
    • 1. From the main menu, select Bridge > Bandwidth Control.
• Chapter 4
• Power over Ethernet
  • PoE Overview
    • Power Budgeting
    • Implementation
    • PoE Operation Modes
  • Viewing the PoE Status
    • 1. From the main menu, select PoE.
  • Setting the Power Management Mode
    • 1. From the main menu, select PoE.
  • Allocating Power to the PoE Ports
    • 1. From the main menu, select PoE.
  • Diagnosing PoE Port Problems
    • 1. From the main menu, select PoE.
• Chapter 5
• SNMP
  • SNMP Overview
    • Default SNMP Community Strings
  • Setting Up the SNMP Community Table
    • 1. From the main menu, select SNMP > Community Table.
  • Setting Up the Host Table
    • 1. From the main menu, select SNMP > Host Table.
  • Setting Up SNMP Trap Receivers
    • 1. From the main menu, select SNMP > Trap Setting.
• Chapter 6
• Port Trunking
  • Port Trunking Overview
    • Static Port Trunk Overview
  • Creating a Port Trunk
    • 1. From the main menu, select Bridge > Trunking.
  • Modifying a Trunk
    • 1. From the main menu, select Bridge > Trunking.
  • Removing a Trunk
    • 1. From the main menu, select Bridge > Trunking.
• Chapter 7
• Port Mirroring
  • Port Mirroring Overview
  • Configuring Port Mirroring
    • 1. From the main menu, select Bridge > Mirroring.
  • Modifying a Port Mirror
    • 1. From the main menu, select Bridge > Mirroring.
• Chapter 8
• VLANs
  • VLAN Overview
  • Port-based VLAN Overview
    • VLAN Name
    • Group ID
    • General Rules for Creating a Port- based VLAN
  • Tagged VLAN Overview
    • Tagged and Untagged Ports
    • Port VLAN Identifier
    • General Rules for Creating a Tagged VLAN
  • Creating a Port-Based VLAN
    • Creating a Port- Based VLAN
      • 1. From the main menu, select Bridge > VLAN > Port-Based VLAN.
    • Modifying a Port- Based VLAN
      • 1. From the main menu, select Bridge > VLAN > Port-Based VLAN.
    • Viewing a Port- Based VLAN
      • 1. From the main menu, select Bridge > VLAN > Port-Based VLAN.
  • Creating a Tagged VLAN
    • Creating a Tagged VLAN
      • 1. From the main menu, select Bridge > VLAN > Tagged VLAN.
    • Modifying a Tagged VLAN
      • 1. From the main menu, select Bridge > VLAN > Tagged VLAN.
    • Viewing a Tagged VLAN
      • 1. From the main menu, select Bridge > VLAN > Tagged VLAN.
  • Changing a Port’s VLAN Mode
    • 1. From the main menu, select Bridge > VLAN > VLAN Mode.
• Chapter 9
• Class of Service (CoS)
  • CoS Overview
    • Scheduling
  • Configuring CoS
    • 1. From the main menu, select Bridge > Default Port VLAN & COS.
  • Mapping CoS Priorities to Egress Queues
    • 1. From the main menu, select Bridge > CoS.
  • Specifying the Scheduling Algorithm
    • 1. From the main menu, select Bridge > COS.
• Chapter 10
• IGMP
  • IGMP Snooping Overview
  • Enabling or Disabling IGMP Snooping
    • 1. From the main menu, select Bridge > IGMP Snooping.
• Chapter 11
• STP and RSTP
  • STP Overview
    • Bridge Priority and the Root Bridge
    • Mixed STP and RSTP Networks
    • Spanning Tree and VLANs
  • Enabling or Disabling Spanning Tree
    • 1. From the main menu, select Bridge > Spanning Tree.
  • Configuring the STP Bridge Settings
    • 1. From the main menu, select Bridge > Spanning Tree.
  • Configuring the Spanning Tree Port Settings
    • 1. From the main menu, select Bridge > Spanning Tree.
• Chapter 12
• Security
  • Port-based Network Access Control
    • Configuring the Bridge Settings
      • 1. From the main menu, select Security > Port Access Control.
    • Configuring the Port Settings
      • 1. From the main menu, select Security > Port Access Control.
    • Viewing the Port Access Control Status
      • 1. From the main menu, select Security > Port Access Control Status.
    • Initializing a Port
      • 1. From the main menu, select Security > Port Access Control Status.
  • Setting Up a Dial-In User
    • Adding a Dial-in User
      • 1. From the main menu, select Security > Dial-in User.
    • Modifying a Dial- in User
      • 1. From the main menu, select Security > Dial-in User.
    • Deleting a Dial-in User
      • 1. From the main menu, select Security > Dial-in User.
  • RADIUS
    • RADIUS Implementation Guidelines
    • Configuring RADIUS
      • 1. From the main menu, select Security > RADIUS.
• Chapter 13
• Statistics
  • Statistics Overview
  • Viewing the Traffic Comparison Statistic
    • 1. From the main menu, select Statistics Chart > Traffic Comparison.
  • Viewing the Error Groups
    • 1. From the main menu, select Statistics Chart > Error Group.
  • Viewing the Historical Status
    • 1. From the main menu, select Statistics Chart > Historical Status.
• Chapter 14
• MAC Addresses
  • MAC Address Overview
  • Working with Dynamic MAC Addresses
    • Displaying the Dynamic MAC Addresses
      • 1. From the main menu, select Bridge > Dynamic Addresses.
    • Changing the Aging Time
      • 1. From the main menu, select Bridge > Dynamic Addresses.
  • Working with Static MAC Addresses
    • Adding a Static MAC Address
      • 1. From the main menu, select Bridge > Static Addresses.
    • Modifying a Static MAC Address
      • 1. From the main menu, select Bridge > Static Addresses.
    • Removing a Static MAC Address
      • 1. From the main menu, select Bridge > Static Addresses.
• Chapter 15
• Downloading New Management Software
  • Downloading New Management Software
    • 1. From the main menu, select System > Firmware Upgrade.
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • H
  • I
  • M
  • P
  • Q
  • R
  • S
  • T
  • V
  • W