Allied Telesis AT-2972T/2 - Manual (Page 37)

Advanced Control Suite User’s Guide
37
ˆ Rx Max Coalesce Frames Threshold hit. The number of times the
Receive Max Coalesce Frames Threshold was hit.
ˆ DMA write Queue was full. The number of times the DMA write
queue was full.
ˆ DMA write High Priority Queue was full. The number of times the
DMA write high priority queue was full.
ˆ DMA Read Queue was full. The number of times the DMA read
queue was full.
ˆ DMA Read High Priority Queue was full. The number of times the
DMA read high priority queue was full.
ˆ Send Data Completion FTQ was full. The number of times the send
data completion FTQ (flow through queue) was full.
ˆ NIC ran out of the Recv Buffer. The number of times the network
adapter ran out of the Recv Buffer descriptors.
ˆ Frames size less than 64-byte with bad FCS. The number of frames
with a size less than 64 bytes with bad FCS.
ˆ MAC Rx w/ Pause Command and Length = 0. MAC control frames
with the pause command and a length equal to 0.
ˆ MAC Rx w/ Pause Command and Length greater than 0. MAC
control frames with the pause command and a length greater than 0.
ˆ MAC Rx w/ no Pause Command. MAC control frames with no pause
command.
ˆ MAC Sent X-on. MAC Transmit with X-on was on.
ˆ MAC Sent X-off. MAC Transmit with X-on was off.
BASP Statistics
Tab
On the BASP Statistics tab you can view performance information about
the network adapters that are on a team. To view this information for any
team member adapter, click the name of the device. To view the BASP
statistics for the team as a whole, click the name of the team, as shown in
Figure 10.