Allied Telesis AT-S62 - Manual (Page 775)

AT-S62 Management Software Menus Interface User’s Guide
775
Note
Login names and passwords are case-sensitive.
RS-232 Port
Default Settings
The following table lists the RS-232 Terminal Port default settings.
SNTP Default
Settings
The following table lists the SNTP default settings.
Switch
Administration
Default Settings
The following table describes the switch administration default settings.
RS-232 Port Setting Default
Data Bits 8
Stop Bits 1
Parity None
Flow Control None
Baud Rate 9600 bps
SNTP Setting Default
System Time 00:00:00 on January 1,
1980
SNTP Status Disabled
SNTP Server 0.0.0.0
UTC Offset +0
Daylight Savings Time (DST) Enabled
Poll Interval 600 seconds
Administration Setting Default
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway Address 0.0.0.0
System Name None
Administrator None
Comments None
BOOTP Disabled