Allied Telesis AT-S63 - Manual (Page 425)

425
Chapter 33
802.1x Port-based Network
Access Control Commands
This chapter contains the following commands:
❑ “DISABLE PORTACCESS|PORTAUTH” on page 426
❑ “DISABLE RADIUSACCOUNTING” on page 427
❑ “ENABLE PORTACCESS|PORTAUTH” on page 428
❑ “ENABLE RADIUSACCOUNTING” on page 429
❑ “SET PORTACCESS|PORTAUTH PORT ROLE=AUTHENTICATOR” on
page 430
❑ “SET PORTACCESS|PORTAUTH PORT ROLE=SUPPLICANT” on page
434
❑ “SET RADIUSACCOUNTING” on page 436
❑ “SHOW PORTACCESS|PORTAUTH” on page 438
❑ “SHOW PORTACCESS|PORTAUTH PORT” on page 439
❑ “SHOW RADIUSACCOUNTING” on page 440
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on 802.1x Port-based Network Access
Control, refer to Chapter 29, “802.1x Port-based Network Access
Control” in the AT-S63 Management Software Menus Interface User’s
Guide.